 |
Graflex.org Get help with your Graflex questions here |
| Crown Graphic Special | |
| Author | Message |
|---|---|
| Gronboi Joined: 31 Dec 2011 Posts: 6 |  Posted: Sat Feb 04, 2012 6:43 pm Post subject: Crown Graphic SpecialI'm looking for a BATTERY COMPARTMENT DOOR for a Crown Graphic Special 4x5. I know this is a pretty obscure part but I'm tired of using electrician's tape to hold things together. Any suggestions? |
| 45PSS Joined: 28 Sep 2001 Posts: 4081 | Posted: Sat Feb 04, 2012 11:03 pm http://mpex.com/ use to carry battery doors for Super Graphics for $40. Call them and ask for the Large Format department. Alternative: Refer to http://www.southbristolviews.com/pics/Graphic/manual-pdf/servicemanual.pdf Remove the top RF cover. Accurately measure the battery door opening. Get a piece of ABS plastic or acrylic, cut it 3/32 to 1/8 inch longer than the opening. Trim the outside edge down so that the piece will fit under the edge of each side. Correct fit will allow the door to slide to one side just enough to allow the other to clear the housing when installing or removing. A piece of spring metal can be bonded to the back side to ensure a secure fit if needed. |
| Gronboi Joined: 31 Dec 2011 Posts: 6 | Posted: Sun Feb 05, 2012 1:21 am Post subject: Battery Door Thanks everyone for your advice. |
| 1banjo Joined: 16 Nov 2008 Posts: 492 | Posted: Tue Feb 07, 2012 4:05 am BATTERY COMPARTMENT COVER FOR GRAFLEX TOP RANGEFINDER Item: 300660116019 |
| All times are GMT |