Will the RH-8, Rh-10, and RH-12 roll back holders all fit a crown graphic 4x5 ? If so what is the suggestion for the one to buy.

Thanks,

Scud

Quote:

On 2002-03-10 22:36, scud wrote: Will the RH-8, Rh-10, and RH-12 roll back holders all fit a crown graphic 4x5 ? If so what is the suggestion for the one to buy. Thanks, Scud

No. They came in shells that fit 2x3 and 4x5. Not sure about 3x4, and like you am too lazy to look it up.

Which to get? Depends on what size negatives or slides you want to make. 2 1/4" square(RH 12), 2 1/4 x 2 3/4 (RH 10), or 2 1/4 x 3 1/4 (RH :cool:.

Cheers,

Dan

They came in 3x4 also, but I think that they didn't have the extra, film-flattening pins. The RH!@'s (6x6) are cheapest, and the RH8's (6x9) the most expensive. They are discussed in detail on this site.

Regards,

Gerald

I'm interested in where I might find these "shells" for my Crown Graphic 4x5. I recently purchased a Graphic 22, but I don't have the "shell"/adapter plate/ or whatever this part is called. I realize this is an old htread, but I thought I'd give it a shot. TIA!

<a href=http://www.bhphotovideo.com/bh3.sph/FrameWork.class?FNC=StartLink__Aindex_html___SID=F77F2A0BC30>B&H Photo</a>,<a href=http://www.bhphotovideo.com/bh3.sph/FrameWork.class?FNC=StartLink__Aindex_html___SID=F77F2A0BC30>Midwest Photo</a>, <a href=http://www.ritzcam.com/>Ritz</a>, and <a href=http://www.ritzcam.com/>Stephen Shuart</a> to name a few of the good ones. Be sure the listing says its for 4x5.

<a href=http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=2948197624&category=15247>An example</a>, not an endorsement.

________________
While a picture may be worth a thousand words, a quality photograph is worth a million.

<font size=-1>[ This Message was edited by: 45PSS on 2003-08-27 23:29 ]</font>

Correct...no rollers in the 3x4 film backs,great pity...it does make a difference.