Graflex.org
Get help with your Graflex questions here

Sync terminal on view camera lenses w/o flash terminal
Graflex.org Forum Index -> Speed Graphic Help
AuthorMessage
chiefcoastie
Joined: 05 Jan 2005
Posts: 8
PostPosted: Mon Jul 09, 2007 8:29 pm   Post subject: Sync terminal on view camera lenses w/o flash terminal

I have seen view camera lenses on ebay that do not have flash sync terminals. Can these PC post be added? I am asking about both electronic and bulb flash.
Thanks in advance.
Anthony[/b]
clnfrd
Joined: 26 Mar 2002
Posts: 616
PostPosted: Mon Jul 09, 2007 9:18 pm

Sync for electronic flash can usually be added to most shutters. And, if this is done, you can, in most cases, use flashbulbs at 1/25th-second or slower, because at these slow speeds the shutter will remain open long enough for a flashbulb to reach its peak of illumination.. A PC connector or any other connector that can be mounted on the shutter frame may be used. It's not a real simple operation, but it can be done.
ImageMaker
Joined: 20 Jun 2006
Posts: 93
PostPosted: Mon Jul 09, 2007 11:22 pm

I'd add here that it may be worth checking whether there's any collector value in your particular lens/shutter combination before having it modified -- and consider just buying another used shutter or lens and shutter that has a synch, rather than pay a worker like the S.K. Grimes shop what it would cost to have a synch added to a pre-WWII shutter. I'm guessing here, but it seems likely to run well over $100 to install a synch (and they'll probably insist on charging you for a CLA at the same time, for which S.K. Grimes isn't the cheapest around -- but they're almost the only folks who could still do a flash synch upgrade). By the time you've paid them for a CLA and synch installation, it'd probably be cheaper to find another lens of similar specs in a synched shutter -- and most large format shutters have choice of M or X synch, which is better for flashbulbs than having to set the shutter to 1/25 or slower...
All times are GMT