| Author | Message |
|---|
jim stafford Joined: 17 Feb 2005 Posts: 8 |  Posted: Sat Apr 23, 2005 3:57 pm
I want to buy an original wood tripod for my Crown 4x5. I see various models on ebay. Crown No.1, No.2, etc. I do street and field photography. Which one would be best for me? |
|
Les Joined: 09 May 2001 Posts: 2682 |  Posted: Sun Apr 24, 2005 8:10 pm
I like my tripods to be able to get the camera to eye level height. That's somewhere around 64" inches on my 5'10" frame. Anything less than that I end up stooping and the photo sessions get might short as my back gives out.
No. 1 goes to "4 1/3" feet (52")
No 2 goes to 4 2/3 feet (58")
Nos. 3 & 4 go to 5 1/2 feet (65")
The 4 is a bit more robust than the #3.
While all of these are very compact to carry, none are fast to set up as you need to lock in 3 legs and then adjust each leg by itself. Getting in a hurry is a sure way to snap a leg, and like race horses, they don't mend very well.
I shot in Chicago with my Crown. Set up;shoot. Walk and repeat. I used a 3001 Bogen fully extended. A 3020 is a bit better, as would any Star D or Tiltall. If I had to fumble with a Crown Tripod, I would have missed half my shots.
Les
|
|
jim stafford Joined: 17 Feb 2005 Posts: 8 |  Posted: Mon Apr 25, 2005 12:41 am
Thanks for the tips and info Les. I'll be able to make a better choice now. Jim |
|
troublemaker Joined: 24 Nov 2003 Posts: 715 |  Posted: Mon Apr 25, 2005 4:57 am
Like anything, everyone has thier favorite. I looked around for a while, and though i also thought about getting a vintage tripod and cleaing it up, I opted for a wooden Berlback 2042 with a swivel ball center post and plenty of height and also can be set up quite low to the ground, or on a platform etc.. I have been using it for about a year now and it is holding up well. In cold weather the wood is more forgiving to touch than aluminum for carrying and set up, and it retains a retro vintage appeal I found hard to pass up...
They have a web site that might be worth a look as a comparison of what's out there...
Have fun,
Stephen |
|