 |
Graflex.org Get help with your Graflex questions here |
| lensboard for 90mm in Graphex | |
| Author | Message | ||
|---|---|---|---|
| ash13brook Joined: 31 Oct 2004 Posts: 3 |  Posted: Sat Feb 05, 2005 4:02 amI have a 90mm in Grphex shutter. The diameter of the shutter appears to be 1 3/16" in diameter. Anyone know where i can get a lensboard drilled or what the actual diameter is in case I have to drill it myself. Thanks, ash13brook | ||
| RichS Joined: 18 Oct 2001 Posts: 1468 | Posted: Sat Feb 05, 2005 4:50 am
New boards are readily available from midwest, and I believe they can drill them for you? | ||
| Dan Fromm Joined: 14 May 2001 Posts: 2165 | Posted: Sat Feb 05, 2005 2:18 pm
| ||
| Henry Joined: 09 May 2001 Posts: 1662 | Posted: Sat Feb 05, 2005 3:39 pm Your other option for drilling the lensboard is your friendly local machine shop. I've had all four of my boards done this way; they charge $8 per. | ||
| Rangemaster Joined: 06 Jul 2001 Posts: 412 | Posted: Sat Feb 05, 2005 6:07 pm Mine is 1 3/16" as well, the boards are very easy to drill, I do all of my own with a small hole saw kit that I purchased at Home Depot, if the board is not drilled, just draw lines from corner to corner to locate center, punch or drill a small pilot hole and then use the correct hole saw, very easy to do. Dave | ||
| TiltallED Joined: 14 Mar 2005 Posts: 9 | Posted: Thu Mar 24, 2005 2:20 am Another place you might consider, to drill holes in lensboards. Is your local High School or Community Collage machine shop, teachers. They might even do it for free, if you bring your Graphex along, to show them (class) the fine machine work and design of a Classic. You could even inspire a future camera repairman, while getting a hole drilled too!  | ||
| JoePhoto Joined: 13 Oct 2001 Posts: 75 | Posted: Sat Apr 02, 2005 8:19 pm If you have the shutter in your hand wouldn't you be the best one to measure it? | ||
| All times are GMT |