Graflex.org
Get help with your Graflex questions here

HOW DO I OPEN THE CAMERA?!?
Graflex.org Forum Index -> Speed Graphic Help
AuthorMessage
DIRT
Joined: 13 Dec 2004
Posts: 1
PostPosted: Wed Dec 15, 2004 9:24 am

how do i get the front of the camera to open/fold down? im not sure what model it is but it has the metal knobs on each side but they dont seem to turn or anything. if you can tell me how to open the camera i will love it. thanks.
sobahguy
Joined: 09 Oct 2001
Posts: 173
PostPosted: Wed Dec 15, 2004 12:44 pm

Quote:

On 2004-12-15 01:24, DIRT wrote:
how do i get the front of the camera to open/fold down? im not sure what model it is but it has the metal knobs on each side but they dont seem to turn or anything. if you can tell me how to open the camera i will love it. thanks.
Hi DIRT....You describe metal knobs on each side so I assume you have a Graphic of some description. Go to the side of the camera where the leather handle or hand grip should be. Run your fingers along the front edge. Near the top edge you may feel a slight bump underneath the leather covering, this bump not much bigger than a nail head. The bump might also be located in the center on the top of the camera. When you press the bump, the bed of the camera should spring open slightly, then you grasp the bed and pull it down and lock it in place. This should reveal a model name plate on the front standard above the lens/lensboard, and there should be a serial number tag on the bed under the focus rail. Once you get this far, post back with additional questions as they come up.
One word of warning...when closing the front of the camera, make sure that the front standard is pushed all the way back inside the body (box) of the camera and turn the focusing knobs so that the focusing rails are racked as far back toward the body as they can go. This will avoid bending the focusing rails or breaking the links on it, both problems being expensive to repair.
Hope this helps
clnfrd
Joined: 26 Mar 2002
Posts: 616
PostPosted: Wed Dec 15, 2004 12:46 pm

Depending on which model you have, there is a little "bump" under the leatherette either top front center or upper right-hand side of the camera. Push on the bump and the camera should pop open. Fred.
t.r.sanford
Joined: 10 Nov 2003
Posts: 812
PostPosted: Wed Dec 15, 2004 4:54 pm

The front should pop open when you press in on the concealed bump. However, sometimes it doesn't, and you have to pull a bit while pressing. Either of the focusing knobs make this easy to do.
45PSS
Joined: 28 Sep 2001
Posts: 4081
PostPosted: Wed Dec 15, 2004 8:11 pm

And if it is green top with a scale and the rest of the body black then its a super which you turn the silver knobs toward the top of the camera to open the bed and the opposite to close.
xc611
Joined: 29 Nov 2005
Posts: 1
PostPosted: Tue Nov 29, 2005 7:27 pm

Quote:

On 2004-12-15 04:46, clnfrd wrote:
Depending on which model you have, there is a little "bump" under the leatherette either top front center or upper right-hand side of the camera. Push on the bump and the camera should pop open. Fred.

I just spend one hour and a half to find out this "bump" yesterday...God!
tchamber
Joined: 17 Sep 2005
Posts: 9
PostPosted: Thu Dec 01, 2005 4:03 am

It's not a bad idea to go to Craig's Camera site and buy the manual for the camera - clears up some of these little mysteries.
All times are GMT