 |
Graflex.org Get help with your Graflex questions here |
| Lens for Kodak Tourist | |
| Author | Message | ||
|---|---|---|---|
| TimKean Joined: 15 Dec 2003 Posts: 24 |  Posted: Mon Feb 16, 2004 2:34 pmI just purchased a Kodak Tourist with the good 105mm Anaston lens in Flash Kodamatic shutter. The shutter operates fine, but the speed adjustment is very sticky, so I figured a Ronsonol soak would be in order. My only problem is I don't know how to remove the front lens element. Does anybody know anything about this? The lens is adjustable, and I'm afraid if I just thread it out, I will wind up loosing the adjustment. Thanks for your help!! | ||
| clnfrd Joined: 26 Mar 2002 Posts: 616 | Posted: Wed Feb 18, 2004 3:13 am Tim...I have some old Kodak cameras...not a Tourist...that have the front lens element that you rotate to set the distance...and there is a slotted stop pin to prevent turning the lens too far in either direction. I removed the stop pin and found that it takes two additional revolutions to remove the front lens element. I replaced the element and found that you wouldn't have the full 360-degree rotation for focusing if you incorrectly replaced the stop pin. Therefore, if you remove the stop pin and count the revolutions necessary to remove the front element...reverse the procedure, you should be okay. Fred. | ||
| jjwalker Joined: 05 Sep 2003 Posts: 29 | Posted: Sat Feb 21, 2004 6:59 am Tim, great qeustion, I have worked on a kodak monitor as well as a tourist and I agree with the previous advice with this caviat,....when you unscrew the lense note EXACTLY where it comes free from the shutter mount. If you reinstall it incorectly things will be blurry I guarantee it! Good Luck. | ||
| TimKean Joined: 15 Dec 2003 Posts: 24 | Posted: Mon Feb 23, 2004 7:51 pm Well, I did as was suggested and found a third element inside. Now, I'm perplexed about how to get it out. I don't see any spanner wrence slots or anything. Again any help will be appreciated. | ||
| Micah in NC Joined: 26 Jun 2003 Posts: 94 | Posted: Wed Feb 25, 2004 9:51 pm Tim, I found Brian Wallen's website to have a good bit of info on the Tourist cameras. (I have a couple, too.) It's at: http://www.staff.uiuc.edu/~b-wallen/BN_Photo/KodakTourist.htm On that page, scroll to bottom and click on "Tech Notes" to bring up his repair tech page on the Tourist. On that "Tech Notes" page, scroll down the the "LENS" heading. Also, try this page of Wallen's: http://www.staff.uiuc.edu/~b-wallen/BN_Photo/FrontcellClng.htm His other webpages are neat, too, and worth a look. Hope this helps, Micah in NC
<font size=-1>[ This Message was edited by: Micah in NC on 2004-02-25 13:54 ]</font> | ||
| All times are GMT |