
Posted: Sun Nov 23, 2003 5:23 pm
| Quote: |
On 2003-11-23 08:13, lamb wrote:
Is it a practical lens for century graphic?
Mine is a 6x9 format.Does it cover?
Also I don't have a lens board for it.So what should I do,to buy one,or to make one?
Thanks for answering!
|
No, not a practical lens. O'scope lenses aren't designed to be used on distant subjects.
Should cover, I think the polaroid film used in the camera the lens came from was larger.
Board? I've never looked closely at an Oscilloscope lens' Alphax shutter, have had a couple of Ilex #3s from 'scope lenses. The Ilexes were not threaded externally at the rear, so could not be mounted on board.
Also, its been a while since I've looked at a 75 mm Wolly o'scope lens, but I think the rear element is too big to clear the front standard. If so, to put the lens on the camera you'll have to unscrew rear cell from lens, mount board on camera, rescrew rear cell from behind. Check that it will clear the bellows before investing much time in it.
The Century uses 2x3 Pacemaker boards. These are metal, with the edge folded over to fit into the light trap. Hard to make by hand. I've used pieces of cardboard carefully cut from the stuff that backs, e.g., yellow pads for temporary use.
Welcome to the club of people who wish there were inexpensive wide angle lenses for press cameras. Such lenses don't exist.
Cheers,
Dan