 |
Graflex.org Get help with your Graflex questions here |
| HV Booster/Analyzer Strobe 250 | |
| Author | Message |
|---|---|
| weare66 Joined: 01 Jul 2003 Posts: 2 |  Posted: Thu Jul 10, 2003 1:59 am I have two units and one charger that appears not to be charging.Does anyone have an electrical schematic for this charger. Thank You |
| wolftinz Joined: 13 Jul 2003 Posts: 1 | Posted: Sun Jul 13, 2003 4:33 pm If you are asking about the AC adapter (Cat.# 4-1361) you probably have a broken lead. This can be checked with a ohm meter. The circuit is very simple, a transformer to step up the line voltage from 115VAC to aprox. 600VAC and a pair of diodes to half wave retify to 450VDC. The reason I suspect it's a brocken lead is that this is the most common failure mode due to a design flaw. The Ac pins are not well secured in the package and will flex with repeated pluging and unpluging, that coupled with short leads from the transformer core will often cause thes thin leads to break. If the lead going in to center of the core breaks you can forget trying to repair it. If some one has a source for a replacement adapter I would be very interested, Best regards, Wolf <font size=-1>[ This Message was edited by: wolftinz on 2003-07-13 09:34 ]</font> <font size=-1>[ This Message was edited by: wolftinz on 2003-07-13 09:36 ]</font> |
| 45PSS Joined: 28 Sep 2001 Posts: 4081 | Posted: Tue Jul 15, 2003 1:26 am Do you need a diagram for the Strobe 250 charger or for the Booster/Analyzer? |
| All times are GMT |