Graflex.org
Get help with your Graflex questions here

Cable release for Ilex #5 Universal Synchro shutter?
Graflex.org Forum Index -> Lenses Help
AuthorMessage
Alfie
Joined: 13 Oct 2002
Posts: 15
PostPosted: Thu Feb 06, 2003 1:00 pm

Ahoy, all ye knowledgeable ones!
I got a 'good deal' on an Ilex #5 shutter, but can't seen to trip it with my cable releases (all fairly new, standard types). It trips fine via the lever. The cables screw in fine, but can't trip the shutter.
Was my 'good deal' a bad deal, or does this monstrous shutter need some type of equally outsized cable release? I think I've heard of a 'long throw' cable release (or I might have imagined that?) - is that what's needed?
Thanks for any input!
Alf
Les
Joined: 09 May 2001
Posts: 2682
PostPosted: Thu Feb 06, 2003 1:50 pm

I think I've heard of a 'long throw' cable release
Yes you have

(or I might have imagined that?)
No you haven't

- is that what's needed?
Yes it is!
I'd call Calumet or B&H and tell them you need a long throw cable release. If they sound dumb then ask for the Large format guy. You might want to try Midwest Camera Ex (www.mpex.com)
I discovered the same situation with my 10" Wide Field Ektar when I wanted to do self time. All of the self timers I had couldn't handle the throw.
AWT
Joined: 05 Sep 2002
Posts: 57
PostPosted: Thu Feb 06, 2003 4:47 pm

So how far of a "throw" is the long-throw?

My cable release shoots out about a half-inch or more and I have to be careful not to mash too hard on it for fear of damaging the shutter.

Maybe if what I've got *is* a long-throw, we might work out a trade....
Dan Fromm
Joined: 14 May 2001
Posts: 2165
PostPosted: Thu Feb 06, 2003 8:30 pm

Quote:

On 2003-02-06 05:00, Alfie wrote:
Ahoy, all ye knowledgeable ones!
I got a 'good deal' on an Ilex #5 shutter, but can't seen to trip it with my cable releases (all fairly new, standard types). It trips fine via the lever. The cables screw in fine, but can't trip the shutter.
Was my 'good deal' a bad deal, or does this monstrous shutter need some type of equally outsized cable release? I think I've heard of a 'long throw' cable release (or I might have imagined that?) - is that what's needed?
Thanks for any input!
Alf
Another possibility is that your shutter needs service. By all means try a long-throw release -- the longest I know of is the Gitzo cable release made specially for the Beaulieu 5008S super 8 cine camera -- but it may not solve your problem.

I had a couple of #3 Ilex Universals with exactly the same problem, and even the super cable couldn't fire them consistently.

Cheers, condolences,

Dan
Alfie
Joined: 13 Oct 2002
Posts: 15
PostPosted: Fri Feb 07, 2003 6:46 am

Thanks to all. I'll try the long throw cable and hopefully that will do the trick.
If not, I'll be in a position to offer someone, a really, really good deal on a #5 shutter :wink:
Springback
Joined: 30 Jul 2002
Posts: 117
PostPosted: Wed Feb 19, 2003 2:39 am

Try either the Gepe or the Calumet HV2000. The Gepe has a slightly longer throw and costs less. The Calumet is more flexible and comes in a nifty red cover. Both are available with Zeiss Disc locks, the Gepe is also available with the t-lock. I've got 2 No.5 Universals and "been there, done that." Good Luck!
All times are GMT