View previous topic :: View next topic |
Author |
Message |
clnfrd
Joined: 26 Mar 2002 Posts: 616 Location: Western Kentucky Lakes Area
|
Posted: Sat Mar 08, 2008 2:26 pm Post subject: |
|
|
The flash contact in the Synchro-Rapid 800 is a very flimsy copper or brass piece. It was totally gone on mine. I replaced it with a piece of cable center conductor flattened with a hammer. Getting into it takes a bit of patience. It's been some time ago but the process was very do-able. I'm not a rocket scientist and was successful and it still works very well with my Strobonar Auto 770. Fred. |
|
Back to top |
|
|
hurdy_gurdyman
Joined: 20 Aug 2004 Posts: 44 Location: Central Michigan
|
Posted: Sat Mar 08, 2008 9:00 pm Post subject: |
|
|
I may give it a try on the shutter that the flash doesn't work on. I was an assistant camera repairman back in the early 80's. I'm rusty, but can probably figure it out.
Dave |
|
Back to top |
|
|
clnfrd
Joined: 26 Mar 2002 Posts: 616 Location: Western Kentucky Lakes Area
|
Posted: Sun Mar 09, 2008 1:00 pm Post subject: |
|
|
I wouldn't swear that the timing is 100% correct with flashbulbs. I was mainly concerned with electronic flash, so with the shutter set for "X", I, of course, soldered the copper piece in place so that contact was made at the instant the shutter is wide open. I assumed that if this is right on, the other would fall into place. I haven't really tested it with flashbulbs, but it's perfect with electronic flash. Neat shutter. Two sets of blades. 1/800th-second. Mine has performed flawlessly, and the Ektar lens is the best I own. The over-all sharpness and tonal gradations of the grey scale are outstanding. I've made 11"X14" enlargements of detailed subjects such as bald cypresses in winter and the results are striking. Fred. |
|
Back to top |
|
|
hurdy_gurdyman
Joined: 20 Aug 2004 Posts: 44 Location: Central Michigan
|
Posted: Sun Mar 09, 2008 2:39 pm Post subject: |
|
|
Fred,
Does your Rapid 800, after your fix, fire the flash when cocking the shutter?
BTW, I haven't used a flash bulb in 20 years. I don't even have a flash bulb type flash unit, but if I ever stumble unto a big batch of blue flashbulbs, I may be enticed to get the "correct" Graflex flash unit (it can always double as a light saber).
Dave |
|
Back to top |
|
|
clnfrd
Joined: 26 Mar 2002 Posts: 616 Location: Western Kentucky Lakes Area
|
Posted: Sun Mar 09, 2008 4:26 pm Post subject: |
|
|
Dave....No, it does not. I just tested it to be sure my memory wasn't failing. I tested it at 1/25th...and 100th-Second with my Auto 770 and it does not fire during cocking...only when I trip the shutter. I usually use 1/100th for all flash shots...just an old habit. Fred. |
|
Back to top |
|
|
45PSS
Joined: 28 Sep 2001 Posts: 4081 Location: Mid Peninsula, Ca.
|
Posted: Mon Mar 10, 2008 3:40 am Post subject: |
|
|
http://www.craigcamera.com/ has the Kodak Shutter manual at the same price that was referenced eariler. Take digital closeups of each stage of disassembly if possible to aid in reassembly. _________________ The best camera ever made is the one that YOU enjoy using and produces the image quality that satifies YOU. |
|
Back to top |
|
|
|