Re: new owner


[ Follow Ups ] [ Post Followup ] [ Graflex.Org Help Board ] [ Instructions ]

Posted by BERT on October 14, 2000 at 21:49:59:

In Reply to: new owner posted by Patsy Dunn on October 14, 2000 at 18:14:18:

: I found a speed graphic camera in my husband's family home attic in New York. It appears to be in fairly good condition with few nicks or marks.
: It had the original flash equipment with it though it was all in pieces.
: It has a hugo meyer rangefinder attached to it and the model no is a 4c. An plate attached to the camera says 'speed graphic'.
: I cannot open the bellows and don't want to force it at all. There are two metal screws? or pins? on each side and I have tried twisting them, pulling them and pushing but the bellows will not move. Any suggestions? Thanks, Patsy Dunn
--------------------
Patsy--Two metal tabs UNDER lensboard --squeeze
together and pull--the pins you are trying to use
are to raise and lower the lensboard--be sure to
retract the rail back into the camera before
retracting the bellows and closing the door
>>also-on the lensboard as you face the lens<<
the lefthand nut rotates up--and the righthand
nut rotates down<<to loosen!!!




Follow Ups: