| View previous topic :: View next topic | 
	
	
		| Author | Message | 
	
		| bobphillips001 
 
 
 Joined: 10 Feb 2022
 Posts: 1
 Location: Mesa, Arizona
 
 | 
			
				|  Posted: Fri Feb 11, 2022 5:24 pm    Post subject: Part missing from Kalart? |   |  
				| 
 |  
				| I have a 4x5 Crown Graphic with a side mount Kalart synchronized rangefinder.  It appears to have a part missing.  The top of the rangefinder has a hole with three notches.  Looking down into that hole I am able to focus.  It is impossible however to do this with the Graphlite mounted.  Photographs I am seeing show an angled piece fitted on the top of the rangefinder.  Suggestions on what I am missing and where I might find a replacement? _________________
 The 4x5 press cameras were REAL cameras.
 |  | 
	
		| Back to top |  | 
	
		|  | 
	
		| 45PSS 
 
 
 Joined: 28 Sep 2001
 Posts: 4081
 Location: Mid Peninsula, Ca.
 
 | 
			
				|  Posted: Fri Feb 11, 2022 8:15 pm    Post subject: |   |  
				| 
 |  
				| look at the last page of the kalart manual https://graflex.org/speed-graphic/kalart-manual.html 
 There is a plate that attaches with a screw to cover the hole when a Focuspot is not installed.  Make a plate from .015-.020 steel, aluminum, brass painted flat black.
 _________________
 The best camera ever made is the one that YOU enjoy using and produces the image quality that satifies YOU.
 |  | 
	
		| Back to top |  | 
	
		|  | 
	
		|  |