Graflex.org Forum Index Graflex.org
Get help with your Graflex questions here
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

1A Graflex, shutter & hood problems

 
Post new topic   Reply to topic    Graflex.org Forum Index -> Reflex Help
View previous topic :: View next topic  
Author Message
Carbo73



Joined: 15 Dec 2019
Posts: 1
Location: Catalonia

PostPosted: Mon Dec 16, 2019 9:15 pm    Post subject: 1A Graflex, shutter & hood problems Reply with quote

Hi, I've just entered this forum. It's my first message. I have a Crown Graphic, a couple of Speed Graphics, a 3x4 Series B, a 4x5 Graflex RB Auto and just since last week, a 1A Graflex.

I bought it from an antiques store (here near Barcelona, Catalonia) in fair good shape externally, and with some problems with the shutter, but that seem repairable. In fact the shutter fires quite well... sideways! That is, as a normal Graflex shutter would move, in fact (because the 1A has a right to left moving shutter curtain). And even pointing the camera downwards I have been able to shoot it horizontally, although all at 4, 5 or 6 tension in the curtain. Obviously the tension should be corrected and the curtain cloth has some slight folds, probably from being in the same position for years. But I think the main problem is in the relase button. The mirror moves up, but unless in the vertical or looking down position, then the shutter does not follows its movement.

Also I have a more intriguing problem with the hood. The camera has most of the characteristics of a latter production 1A type, with the shorter focusing hood, but the hood itself is of the earlier type. And here's the problem. It's only attached to the camera with 2 of 4 screws, the rear ones, and the top cover can't be closed. First I thought it was a transition model, but now I think somebody put an earlier hood to a later hood camera. Why? Maybe the original was lost and they could only find this one? But in fact in the web I've seen another similar "transition" camera. The serial number is on the 55XXX range, so it looks probably made in 1917-18, that is, the time where the hood was changed.

What should I do with the hood? Left it with only 2 screws (the other 2 are not missing, they were never there as there are no holes in the wood!)? But tha leaves the hood unstable and prone to breaking the screws. Put another 2 screws in front? But then the cover will continue to be impossible to close, as the hood ensemble is at least 2mm too high! Or maybe cut a bit of the wood arround the 4 places where the hood touches the frame? Probably that would not work, as it's on the bottom, near the ground glass also the hood structure makes contact with the rest of the camera...
Back to top
View user's profile Send private message
45PSS



Joined: 28 Sep 2001
Posts: 3810
Location: Mid Peninsula, Ca.

PostPosted: Thu Dec 19, 2019 4:09 am    Post subject: Reply with quote

I'm not familiar with the 1A. I have repaired a 3A.
My shutter repair information is here:
https://drive.google.com/file/d/0B1sPJkp-MdghRkRId1EwT0dpNkk/view?usp=sharing
The 3A servicing information is here: https://drive.google.com/file/d/0B1sPJkp-MdghSm5xZW9nMVlfOFE/view?usp=sharing

Read this thread for tips on the curtain. https://graflex.org/helpboard/viewtopic.php?t=5624

I hope this helps.
_________________
The best camera ever made is the one that YOU enjoy using and produces the image quality that satifies YOU.
Back to top
View user's profile Send private message Visit poster's website
Display posts from previous:   
Post new topic   Reply to topic    Graflex.org Forum Index -> Reflex Help All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group