View previous topic :: View next topic |
Author |
Message |
OlderGuy
Joined: 20 Aug 2015 Posts: 10 Location: Santa Cruz CA
|
Posted: Tue Aug 25, 2015 5:55 am Post subject: restoration of a Century Graphic |
|
|
Where would be a good place to find information on refurbishing a Century Graphic?
I saw a post on Ebay of a reprint of the assembly and repair of one of these, but it was dated 1961, so I don't know if it would be the correct manual for my camera.
The serial number of my Century is: 531442, if that means anything. ![](images/smiles/icon_eek.gif) _________________ What did I get into anyway? |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
1banjo
Joined: 16 Nov 2008 Posts: 492 Location: kansas
|
Posted: Tue Aug 25, 2015 12:28 pm Post subject: |
|
|
The century graphic camera from 1949 to 1970 is essentially the same camera very few modifications. So any shop service manual for a century graphic should be usable for your camera the major difference on any century is what type of lens it has. So you may need to find a service manual for your shutter |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
1banjo
Joined: 16 Nov 2008 Posts: 492 Location: kansas
|
Posted: Tue Aug 25, 2015 1:42 pm Post subject: |
|
|
Now as to your s#531442 would be a
1962 or 1963
A s# of 528754 is a 1962
A s# of 531994 is a 1963 |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
45PSS
Joined: 28 Sep 2001 Posts: 4081 Location: Mid Peninsula, Ca.
|
Posted: Tue Aug 25, 2015 7:48 pm Post subject: |
|
|
Date code http://graflex.org/helpboard/viewtopic.php?t=3321 is on the bottom of the rails, most likely the front most cross member. The ink stamp may be faded and hard to see or washed off during a cleaning.
Otherwise its 1963, #58 of 1500 built from July '63 to May '64. _________________ The best camera ever made is the one that YOU enjoy using and produces the image quality that satifies YOU. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
OlderGuy
Joined: 20 Aug 2015 Posts: 10 Location: Santa Cruz CA
|
Posted: Thu Aug 27, 2015 12:01 am Post subject: Another question... |
|
|
First thank you all for the replies.
Now I am wanting to get a wide angle lens for my camera. KEH has a 65mm 6.8 Angulon in a Linhof Synchro Compur. It is rated as EX, but that is just one step above BGN. Any thoughts anybody?
It says on the Graflex.org site that a 47mm lens would work on a Century, but what brands would they be?
I can't find any that are not listed as 'Super' something or another and correct me if I am wrong, but I can't see how a 47mm Super Angulon would fit on this camera.
Thanks all, _________________ What did I get into anyway? |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
45PSS
Joined: 28 Sep 2001 Posts: 4081 Location: Mid Peninsula, Ca.
|
Posted: Thu Aug 27, 2015 1:19 am Post subject: |
|
|
The Synchro Compur is a work horse shutter. Compur is a Zeiss company. Synchro means its synchronized for flash. If its been maintained it will be reliable. It may need a Clean Lube Adjust which will run around $100. It is a difficult shutter to learn on if attempting to do the CLA yourself.
The Angulon will cover the format it is designed for. A Super Angalon has a a larger image circle allowing for more movements. The data for the Angulation and Super Angulon is here: https://www.schneideroptics.com/info/vintage_lens_data/large_format_lenses/index.htm
Coverage is based on the diagional of the format in use. The Century Graphic is a 2 1/4 x 3 1/4 format camera. According to the ANSI standards the image size is 2.163 x 3.338 inch. The diaognal in millimeters is 100.66. _________________ The best camera ever made is the one that YOU enjoy using and produces the image quality that satifies YOU. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Henry
Joined: 09 May 2001 Posts: 1636 Location: Allentown, Pennsylvania
|
Posted: Thu Aug 27, 2015 12:18 pm Post subject: Re: Another question... |
|
|
OlderGuy wrote: | First thank you all for the replies.
Now I am wanting to get a wide angle lens for my camera. KEH has a 65mm 6.8 Angulon in a Linhof Synchro Compur. It is rated as EX, but that is just one step above BGN. Any thoughts anybody?
It says on the Graflex.org site that a 47mm lens would work on a Century, but what brands would they be?
I can't find any that are not listed as 'Super' something or another and correct me if I am wrong, but I can't see how a 47mm Super Angulon would fit on this camera.
Thanks all, |
I very much doubt that any 47mm lens would work on a Century, regardless of what it says on this site (where is that reference, BTW? I don't recall seeing it here.). I have the Optar 65mm/f6.8 in Graphex shutter, and it is just possible to get infinity focus with the bed racked all the way back into the camera body.
The "normal" lens for the Century is 101-103-105mm (take your pick). I have the 103 Graftar in Century shutter, which was "standard" for this camera, as well as the 101 Optar in Graphex. (All these shutters are Wollensaks.) I find the Graftar is excellent, esp. for hand-held work in the self-cocking Century shutter, but the lens doesn't cover movements (rise/fall, shift). For this, the Optar 101 on tripod is recommended. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Dan Fromm
Joined: 14 May 2001 Posts: 2120 Location: New Jersey
|
Posted: Thu Aug 27, 2015 12:47 pm Post subject: |
|
|
Henry, I use a 47/5.6 Super Angulon on my Century. Also a 45/9 Carl Zeiss Jena Dagor. And, finally, a 35/4.5 Apo Grandagon.
OlderGuy, 47/5.6 and 47/8 Super Angulons will work on a Century. So will the much less common 47/8 Ilex and the much more expensive 45/4.5 Apo Grandagon.
To attach a 35 or 45 Apo Grandagon (on board, ready to use) to a Century, unscrew the rear cell, mount board with shutter and front cell. Then wiggle the rear cell through the camera's gate and screw it back into the shutter.
My 47/5.6 SA's rear cell passes through the front standard. Putting it on the camera isn't a problem.
The 65/6.8 Angulon and 65/6.8 Optar/Raptar are different designs but are functionally equivalent. I had a 65 Raptar, never got a satisfactory shot with it. I have 58/5.6 Konica Hexanon (ex-Koni Omegaflex), 60/5.6 Konica Hexanon (ex-Koni Omega), 60/14 Berthiot Perigraphe, 65/8 Ilex, 65/8 Fuji SWD. The last two are f/8 Super Angulon clones.
The Koni lenses are good but their native shutters will work only on their native cameras so they're somewhat poisoned gifts unless you have a spare #0 shutter (press will work with the 58, the 60 needs a cock-and-shoot). The Ilex is uncommon. The Perigraphe is a marvel but expensive to adapt. Your best bet for a 65 or so would be an f/8 Super Angulon or the Fuji equivalent. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Henry
Joined: 09 May 2001 Posts: 1636 Location: Allentown, Pennsylvania
|
Posted: Thu Aug 27, 2015 6:03 pm Post subject: |
|
|
OlderGuy, Dan Fromm is the authority on this matter; I defer to his advice. I will say that my 65 Optar gives satisfactory results but it is tricky to focus. In my experience, if you happen to hit the sweet spot with it the image is very sharp. Also, keep in mind that there are sample variations, and one man's 65 may be better or worse than another's. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
OlderGuy
Joined: 20 Aug 2015 Posts: 10 Location: Santa Cruz CA
|
Posted: Thu Aug 27, 2015 10:59 pm Post subject: Angulon 65mm 47mm Super, etc... |
|
|
Thanks to all of you for the what seems to be a complete discussion on this subject, that is if there is no more. You all have given me a very good starting place and it seems I don't need to be in any great hurry to buy the first lens out there.
Thanks again,
Older Guy ![](images/smiles/icon_biggrin.gif) _________________ What did I get into anyway? |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Dan Fromm
Joined: 14 May 2001 Posts: 2120 Location: New Jersey
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
OlderGuy
Joined: 20 Aug 2015 Posts: 10 Location: Santa Cruz CA
|
Posted: Fri Aug 28, 2015 5:13 am Post subject: Schneider Super-Angulon Multicoated 65 mm F/5.6 Lens |
|
|
What about a Schneider Super-Angulon Multicoated 65mm F/5.6 Lens?
Would that fit in a Century and also, would I need a center filter?
Would I be better off with an f/8? An f/8 isn't multicoated though.
![](images/smiles/icon_confused.gif) _________________ What did I get into anyway? |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Dan Fromm
Joined: 14 May 2001 Posts: 2120 Location: New Jersey
|
Posted: Fri Aug 28, 2015 1:22 pm Post subject: |
|
|
If you have the money a 65/5.6 SA is preferable to an f/8er because it is 1 stop faster and therefore easier to focus. Multicoating is nice, isn't all that important.
But and however, the f/5.6er's rear cell will have to be removed and reattached -- see my comments above about Apo-Grandagons -- when the lens is put on the camera.
Other lenses in this class include the 65/5.6 EBC Fujinon SWD, 65/4.5 Grandagon-N and Nikkor-SW 65/4.
If I felt the need for a fast 65 I'd probably buy the Grandagon.
You should find all this out for yourself. This list of links http://1drv.ms/1w0vbMD will help you do that.
Remember, Graphics help those who help themselves. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
OlderGuy
Joined: 20 Aug 2015 Posts: 10 Location: Santa Cruz CA
|
Posted: Sat Sep 05, 2015 2:46 am Post subject: CLA again |
|
|
Hello again.
I just received my 47mm f/8 Super Angulon. Everything is there, I mean the retaining ring was included along with both lens caps. Looks very clean and clear, and the shutter works, but I don't know how accurate it is. My guess would be to get it CLA'd, but I also need a lens board for my Century.
Does anybody have any suggestions as to where to get the CLA done and where to go to get a lens board? Does anybody here offer this type of service? I am of the belief that the Synchro Compur shutter is a #00, as it is a lot smaller than my #0 shutters. Also, that is what the Vintage section of the Schneider site says it is.
Any suggestions are welcome,
Steven ![](images/smiles/icon_smile.gif) _________________ What did I get into anyway? |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Dan Fromm
Joined: 14 May 2001 Posts: 2120 Location: New Jersey
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
|