Graflex.org Forum Index Graflex.org
Get help with your Graflex questions here
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Kalart type F adjusting

 
Post new topic   Reply to topic    Graflex.org Forum Index -> Accessories Help
View previous topic :: View next topic  
Author Message
45PSS



Joined: 28 Sep 2001
Posts: 3669
Location: Mid Peninsula, Ca.

PostPosted: Sat Apr 18, 2015 3:38 am    Post subject: Kalart type F adjusting Reply with quote

Refer to the photos T thru W at https://www.flickr.com/gp/thirteenthumbs/15yZH4/
and post http://graflex.org/helpboard/viewtopic.php?t=6684

Installation to body:
1. Position the arm mount on the inside of the body over the hole for the RF shaft.
2. Slide RF shaft through the body and RF arm then attach to the body with 4 screws, #2 oval head wood 3/8-1/2 inch long.
3. Attach RF Arm Foot to the bed with screw machine screw and guide spacer. Verify foot will slide smoothly under the guide spacer, photo T.
4. Run the rails in fully.
5. Using a tool that fits the flats on the RF Shaft turn the shaft counterclockwise (toward the camera back) then then tighten RF Arm so that it is at its rearmost movement (almost touching the back of the body opening).
6. Set the infinity adjustment screw, photo V and scales to their center positions. Set the rail guide, photo T to its center position.
7. Mount the camera no a tripod and point toward an infinity target at least 5000 feet away (1524 meters).
8. Adjust rail guide photo T to achieve coincidence at infinity.

Changing lens or continuing from installation to the body:
9. Set scales according to the scale chart in the photos link.
10. Adjust Infinity screw, photo V, to obtain coincidence at infinity.
11. Focus the lens on a fine detail target at 15 feet. Check rangefinder coincidence and adjust the 15 foot scale, rear scale photo W, as needed.
12. Recheck infinity and adjust the Infinity Screw, photo V, as needed.
13. When coincidence is unchanged from infinity and 15 feet focus the lens on a fine detail target at 4 feet.
14. Recheck coincidence at infinity and 15 feet. Recheck the 4 foot setting if either of the previous two are changed.
_________________
The best camera ever made is the one that YOU enjoy using and produces the image quality that satifies YOU.
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Graflex.org Forum Index -> Accessories Help All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group