cariocakev
Joined: 27 May 2011 Posts: 7 Location: Denver
|
Posted: Fri Jun 13, 2014 2:56 pm Post subject: Linhof cut/sheet film holders in a 23 Pacemaker |
|
|
Hello friends,
I'm curious if anyone has experience using Linhof 2 1/4 X 3 1/4 or 6.5 X 9 cut film holders in a Graphic?
I see on the ones I've handled that there is a ridge that runs all the way around the four edges of the holder as if on the Linhof cameras that ridge slips into a slot in the back. The 4X5 and 9X12 Linhof holders don't appear to have this ridge.
It's also incomplete where the flap pops up to load/unload the holder.
I'm wondering two things: Will that ridge put the film or plate out of the focus plane? If it doesn't, will the gap in that ridge cause a light leak?
These holders could be fun for tintypes or glass plates, but they ain't cheap. Looking not for guesses or assumptions here, but actual experience!
Thanks! _________________ "Photography has flourished for a century and a half with only two real subjects: beauty, and bad news." -- Larry McMurtry
Kevin Moloney Photography
http://www.KevinMoloney.com |
|