Graflex.org Forum Index Graflex.org
Get help with your Graflex questions here
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Strange Graphic View II

 
Post new topic   Reply to topic    Graflex.org Forum Index -> View Help
View previous topic :: View next topic  
Author Message
Henry



Joined: 09 May 2001
Posts: 1636
Location: Allentown, Pennsylvania

PostPosted: Sat May 18, 2013 9:13 pm    Post subject: Strange Graphic View II Reply with quote

The camera pictured here, http://www.ebay.com/itm/Vintage-Graflex-4x5-Graphic-View-monorail-camera-3-lenses-red-bellows-/271193675030?pt=US_Vintage_Cameras&hash=item3f24671516 , has front and rear standard mounts facing in opposite directions. Ditto the one pictured here, in the top picture: http://graflex.org/articles/graphic-view/GraphicViewII.html . Note, however, that the photo labelled "Rise and Tilt" has the front mount facing out! But the one pictured on this page, http://graflex.org/articles/graphic-view/ , has them oriented in the same direction, which is the only way I've ever seen the Graphic View II pictured. How can this be? What gives here?
Back to top
View user's profile Send private message
45PSS



Joined: 28 Sep 2001
Posts: 4081
Location: Mid Peninsula, Ca.

PostPosted: Sun May 19, 2013 3:53 am    Post subject: Reply with quote

Henry,
Look at the auction listing pictures, the focus knobs for the standards are on the left. Look at the pictures on the home page articles, the focus knobs are on the right.

Easy enough to disconnect the back and front standard frames from the standard arms, reverse them, and reattach for left handed operation.
_________________
The best camera ever made is the one that YOU enjoy using and produces the image quality that satifies YOU.
Back to top
View user's profile Send private message Visit poster's website
Henry



Joined: 09 May 2001
Posts: 1636
Location: Allentown, Pennsylvania

PostPosted: Sun May 19, 2013 1:41 pm    Post subject: Reply with quote

OK, got it, Charles. I didn't realize you could so easily reverse the parts. Still, why would you need to? There are focussing knobs on both sides, no?

[Later.] So the black knobs are the focussing knobs. Now I see. But is it not possible to just reverse the bracket down there under the track, by removing the knurled (silvered) knobs from underneath the standard mount and turning the bracket around? Seems that would be simpler.
Back to top
View user's profile Send private message
45PSS



Joined: 28 Sep 2001
Posts: 4081
Location: Mid Peninsula, Ca.

PostPosted: Sun May 19, 2013 7:38 pm    Post subject: Reply with quote

Pull out on the black knob and releases it from the gear track on the under side of the rail, slide the standard to the approximate position you want it in, push the black knob in to engage the focus track, focus with the black knob, and lock the position with the silver lock knob.
http://www.southbristolviews.com/pics/Graphic/manual-pdf/GVII-Instruct2.pdf

The service manual
http://www.southbristolviews.com/pics/Graphic/manual-pdf/GraphicView2Service.pdf
shows the parts to be quite modular making swapping positions and directions easy.
_________________
The best camera ever made is the one that YOU enjoy using and produces the image quality that satifies YOU.
Back to top
View user's profile Send private message Visit poster's website
GerWP



Joined: 29 Nov 2001
Posts: 23

PostPosted: Thu Aug 04, 2016 7:08 pm    Post subject: Backwards? Reply with quote

Greetings, View fans!
I wrote the article on the Graphic View cameras. Those are my cameras in the article. I have a number of Views and View II's, and none of them have reversed standards. The camera in the article that is said to have a reversed standard is probably the same camera as the one that is said not to have to have the reversed standard (rise and tilt). The angle of one of the images apparently creates the illusion that the standard is reversed. But it is not! I promise!
They could certainly be reversed, but I had never seen it before this post.

Best regards,

Gerald Pierce (GerWP)
Back to top
View user's profile Send private message Send e-mail
GerWP



Joined: 29 Nov 2001
Posts: 23

PostPosted: Fri Aug 19, 2016 3:58 pm    Post subject: Reply with quote

Well, here is another one on eBay with a reversed front standard:
http://www.ebay.com/itm/Graphic-View-4x5-View-Camera-/142089848465?hash=item2115370691:g:9uEAAOSw6n5XteJ2

Gerald
Back to top
View user's profile Send private message Send e-mail
Display posts from previous:   
Post new topic   Reply to topic    Graflex.org Forum Index -> View Help All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group