View previous topic :: View next topic |
Author |
Message |
markdotdavies
Joined: 22 Aug 2002 Posts: 1 Location: Australia
|
Posted: Fri Aug 23, 2002 5:17 am Post subject: |
|
|
Hi fellow Graflexians,
I am looking to buy a Super Speed Graphic (that is what it is advertised as) and want to use it for landscapes (wide) and portrait. Can I fit the Schneider XL range of newer lenses and can I fit the Horseman 612 RFH. If these items are not suitable, what would be equivalent alternatives.
Your help would be appreciated.
_________________ regards,
Mark
mark@romteck.com |
|
Back to top |
|
|
Les
Joined: 09 May 2001 Posts: 2682 Location: Detroit, MI
|
Posted: Fri Aug 23, 2002 12:52 pm Post subject: |
|
|
I can't see why the Horseman 6x12 film holder won't fit. but the XL lenses, if i'm not mistaken, have apretty large rear cell.
Try to find out from the seller that the diameter of the front standard is, then check the schneider website for the specs on the lenses you were looking for. I don't have a Super speed here to check.
One way around the small opening in the front standard is to unscrew the rear cell of the lens, put the lens on the front and the screw the rear cell in from the back by removing the ground glass. But for the price of the XL line it would make me nervous too.
you probably won't be able to close the front door either with the lens in place.
_________________ "In order to invent, you need a good imagination and a lot of junk" Thomas Edison |
|
Back to top |
|
|
45PSS
Joined: 28 Sep 2001 Posts: 4081 Location: Mid Peninsula, Ca.
|
Posted: Fri Aug 23, 2002 7:44 pm Post subject: |
|
|
Super Speed front standard opening appears to be 72.5 mm.
_________________ The best camera ever made is the one that YOU enjoy using and produces the image quality that satifies YOU. |
|
Back to top |
|
|
|