View previous topic :: View next topic |
Author |
Message |
ladyrio
Joined: 26 Jan 2008 Posts: 2 Location: Portsmouth UK
|
Posted: Sun Jan 27, 2008 12:28 pm Post subject: Optar with graphex shutter XM synchro |
|
|
I have an f4.7 135mm optar with synchro switch. This has a two prong connector. Is it possible to use this with a modern electronic flash. If so how?
Frank |
|
Back to top |
|
|
Les
Joined: 09 May 2001 Posts: 2682 Location: Detroit, MI
|
Posted: Sun Jan 27, 2008 1:15 pm Post subject: |
|
|
On the shutter end you'll need a bi-post cord. Paramount sells them (www.paramountcords.com) Set the shutter delay switch to zero (no off, but 0). The other end of the cord needs to connect with your flash. You'll know better than I what that takes.
Most of the bigger flashes have a house hold or "H prong" socket and even a vivitar 283 can have a household socket attached to it. If your flash is a houshold and you don't want to pop $20 for a new Paramount cord, head over to you local Salvation Army and check their electric shaver junk box, most shavers use a cord that will work. I know my braun cord does. _________________ "In order to invent, you need a good imagination and a lot of junk" Thomas Edison |
|
Back to top |
|
|
C. Henry
Joined: 13 Dec 2005 Posts: 360 Location: North East Georgia, USA
|
Posted: Sun Jan 27, 2008 6:35 pm Post subject: |
|
|
Les knows and you probably know that 0 shutter delay is often called X sync.
If your shutter sync switch is marked "X" and "M" use the "X" setting for electronic flash.
C. Henry |
|
Back to top |
|
|
|