Graflex.org Forum Index Graflex.org
Get help with your Graflex questions here
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Graphic view lens

 
Post new topic   Reply to topic    Graflex.org Forum Index -> View Help
View previous topic :: View next topic  
Author Message
campy



Joined: 23 Sep 2002
Posts: 51
Location: mass.

PostPosted: Wed Mar 19, 2003 2:35 am    Post subject: Reply with quote

I have a graphic view on it's way that I got off of ebay. It says it has an Caltar no. 1331 lens. 8.5 inch (215mm) f4.8 Ilex Calumet series s lens. Does anyone know if this is a decent lens. I can't seem to find too much info on it. I am new to view cameras and would appreciate any usefull info you might offer.
Back to top
View user's profile Send private message
Les



Joined: 09 May 2001
Posts: 2682
Location: Detroit, MI

PostPosted: Wed Mar 19, 2003 2:44 am    Post subject: Reply with quote

While the 'net is filled with this test and that design the truth is the kind of life the lens lead up until now has a bigger effect on it's performance than it's pedigree. Hence the only way to know is to test THAT lens.

I"m guessing it's a tessar formula, will have good movements, but if it on a GV and not a GVII you won't be able to do a lot of macro shots with it. Portraits, table top, some landscape will be fine.
Back to top
View user's profile Send private message
RichS



Joined: 18 Oct 2001
Posts: 1468
Location: South of Rochester, NY

PostPosted: Wed Mar 19, 2003 2:47 am    Post subject: Reply with quote

Well, lets see what discussion this brings up
From the book...
The only Caltar S 8 1/2" f/4.8 listed is a convertible to 14" f/10. Says the 8 1/2 will cover 5x7 and the 14" 8x10. Made by Scheider.
The Ilex-Caltar 8 1/2 is a f/6.3 and not convertible.
I honestly can't say anything about the lens personally. But from the specs, it's one I wouldn't mind having at all. At 5x7 coverage, it'll give you plenty of movements on 4x5. And it converts to a 14" with 8x10 coverage.
It sounds pretty good to me!
Back to top
View user's profile Send private message Send e-mail Visit poster's website
Les



Joined: 09 May 2001
Posts: 2682
Location: Detroit, MI

PostPosted: Wed Mar 19, 2003 3:12 am    Post subject: Reply with quote

Well Tessars aren't convertable. The f10 is typical of process lenses and they are convertable, but the f10 is combined usually.... Hmmm



_________________
"In order to invent, you need a good imagination and a lot of junk" Thomas Edison
Back to top
View user's profile Send private message
RichS



Joined: 18 Oct 2001
Posts: 1468
Location: South of Rochester, NY

PostPosted: Wed Mar 19, 2003 4:20 am    Post subject: Reply with quote

Well, it's f/10 _only_ if it's a convertable. And as we found out with Dan, these references aren't always accurate... But that is the only Caltar f/4.8 listed in the book except for the 180mm convertable.
Maybe Campy can clear it up after he gets the camera? If he's lucky, and it a convertable, it will have a dual scale on the shutter, which apparently was originally a copal...
P.S., that should read "SchNeider" up there
Back to top
View user's profile Send private message Send e-mail Visit poster's website
campy



Joined: 23 Sep 2002
Posts: 51
Location: mass.

PostPosted: Wed Mar 19, 2003 12:22 pm    Post subject: Reply with quote

I expect to receive the camera on Monday. I will let everyone know what the lens is. Thanks everyone.
Back to top
View user's profile Send private message
Nick



Joined: 16 Oct 2002
Posts: 494

PostPosted: Wed Mar 19, 2003 7:24 pm    Post subject: Reply with quote

I found this

"The Ilex Acuton was an f/4.8 lens of 6 elements in the Plasmat
configuration.
Ilex shows it was available in three focal lengths: 6", 7 1/2" and 8 1/2".
They had an angle of view of 70 degrees (again presumably this is stopped
down). These were convertible lenses, the rear element alone giving about
twice the focal length of the combined lens. Two aperture scales were
marked
on the shutter. The 8 1/2" Acuton must have been the same lens as the
Ilex-made 215mm Caltar-S that Calumet once offered. Unlike the Caltar-S's
in
other focal lengths which were f/5.6 lenses made in Germany, the f/4.8
Caltar-S was sold as a convertible lens."


Obviously an Ilex will be an Ilex-))
Back to top
View user's profile Send private message
campy



Joined: 23 Sep 2002
Posts: 51
Location: mass.

PostPosted: Thu Mar 20, 2003 10:49 pm    Post subject: Reply with quote

There is a lens with a similar description on ebay. Search for item # 2918608115.
Is it a descent lens?
Back to top
View user's profile Send private message
Dan Fromm



Joined: 14 May 2001
Posts: 2118
Location: New Jersey

PostPosted: Sat Mar 29, 2003 3:13 am    Post subject: Reply with quote

Quote:

On 2003-03-20 14:49, campy wrote:
There is a lens with a similar description on ebay. Search for item # 2918608115.
Is it a descent lens?
Supposed to be really good.

Not relevant to the question, but I have what I believe is an Ilex Acugon (65/ and its astonishing. Just great.

As I understand it, the modern designs that Ilex made for, among others, Calumet, were fully competitive with contemporary German and Japanese equivalents.

Cheers,

Dan
Back to top
View user's profile Send private message
campy



Joined: 23 Sep 2002
Posts: 51
Location: mass.

PostPosted: Sat Mar 29, 2003 3:01 pm    Post subject: Reply with quote

I received the camera and lens. On the lens itself it says 8.5 inch(215mm) f4.8 Ilex-Calumet Series-S Caltar no. 1331. The shutter is an Ilex no.3 Acme f4.5. There is only one set of f-stops. Does this mean it is not a convertable or not the original shutter? The speeds are off so I will probably send it to SK Grimes for CLA.
Back to top
View user's profile Send private message
RichS



Joined: 18 Oct 2001
Posts: 1468
Location: South of Rochester, NY

PostPosted: Sun Mar 30, 2003 3:30 am    Post subject: Reply with quote

There is always the possibility that the lens is correct as stated. Apparently there were quite a few lenses under contract from Ilex and some of them never saw the Caltar/Calumet name. From what I've read, many of them were then marketed by Ilex under various other names. one of them being "Acuton", which happens to include a 215 f/4.8 which cover 8x10 and is not convertable. Or it could be the convertable lens without a dual scale?
If you'r going to send it to Grimes, ask him. Or, you could just pull the front element off and try focuing at infinity. If it does focus, and it's about 14 inches, and reasonably sharp, then it's the convertable lens and Grimes could equip the shutter with a proper scale for it. If it doesn't focus, then it's one of the other lenses and may fall into the "rare" category...


[ This Message was edited by: RichS on 2003-03-29 19:31 ]
Back to top
View user's profile Send private message Send e-mail Visit poster's website
campy



Joined: 23 Sep 2002
Posts: 51
Location: mass.

PostPosted: Sun Mar 30, 2003 4:28 pm    Post subject: Reply with quote

I tried taking front element off as you suggested, but I could not focus at infinty. If I take the rear element off I can focus fairly well, although I did not have a clear shot at infinity due to obstructions. You mentioned 14 inches, is that the distance for bellows extension?
I am new to view cameras and can't beleive how much I don't know.
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Graflex.org Forum Index -> View Help All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group