View previous topic :: View next topic |
Author |
Message |
woodplane
Joined: 20 Sep 2005 Posts: 33 Location: Chicago
|
Posted: Tue Feb 26, 2008 6:47 am Post subject: Cleaning really filthy lenses |
|
|
Hi all,
It's been a while since last I posted as I have been busy remodeling and life in general has kept me away. I recently acquired a few lenses from an estate sale. They were not well stored and show it. I cleaned a couple with Zeiss microscope lens cleaning tissues. The isopropyl alcohol evaporates too fast. I would like to use one of those tissues (not too) wet with a mild detergent solution. I don't want to get water where is should not be, but I also think I need to be very careful not to drag the grunge across the surface. Any better ideas? |
|
Back to top |
|
|
45PSS
Joined: 28 Sep 2001 Posts: 4081 Location: Mid Peninsula, Ca.
|
Posted: Tue Feb 26, 2008 9:32 am Post subject: |
|
|
Start with a very soft brush and remove the loose dust and sand from the surface.
Next use the best lens cleaning cloth and your breath and wipe the lens spotless.
The best lens cleaning cloth, small.
The best lens cleaning cloth, large.
After using one of these all other microfiber cloths are just cloths. _________________ The best camera ever made is the one that YOU enjoy using and produces the image quality that satifies YOU. |
|
Back to top |
|
|
Henry
Joined: 09 May 2001 Posts: 1636 Location: Allentown, Pennsylvania
|
Posted: Tue Feb 26, 2008 4:25 pm Post subject: |
|
|
What 45PSS said. Kodak (remember them?) used to market a lens cleaning solution (frightfully expensive!), which works well. Otherwise I use a drop of Windex® on the ragged end of a sheet of lens cleaning tissue rolled up and torn in two, and *lightly* go over the lens surfaces with the ragged end, finishing with the dry end. I once read (in a photo mag?) how to make your own lens cleaning solution; I think the formula was distilled water, with *tiny* amounts of liquid dish detergent and Photo-Flo. But if your breath vapors will do it, forget this other stuff is my advice.
I myself wouldn't use anything with alcohol in it, because I don't know what it will do to coatings or lens element cement.
You can blow the big lumps (dust specks, sand, boulders, etc.) off the lens surface with one of those combination lens brush/squeeze bulb thingys, but don't use the brush! I've found that they tend to scratch; a high-quality camel's hair artist brush is OK. Or use canned air. I used to have an ear syringe handy for the purpose. If there is something stuck to the surface, use the tip of a wooden toothpick very very very carefully to dislodge it. |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|