View previous topic :: View next topic |
Author |
Message |
scottspeck
Joined: 24 Dec 2006 Posts: 3 Location: Maryland, USA
|
Posted: Sun Dec 24, 2006 2:48 pm Post subject: |
|
|
This might sound like a really dumb question, but, with the RH-10 film holder, how far should I pull the metal "slider septum" out of the film holder to expose? Should I pull it all the way out, or will that allow light into the compartment? No RH-10 instruction manuals that I've found address this! Thanks for any help,
Scott Speck |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Henry
Joined: 09 May 2001 Posts: 1636 Location: Allentown, Pennsylvania
|
Posted: Sun Dec 24, 2006 2:57 pm Post subject: |
|
|
The "slider septum," a/k/a "dark slide," is pulled out of the holder completely, just before operating the shutter to expose the film, then it is replaced into its slot in the holder before advancing the film to the next frame. Have you figured out how to load a roll of 120 into the holder yet? That's the usual challenge if you're unfamiliar with this gadget. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
scottspeck
Joined: 24 Dec 2006 Posts: 3 Location: Maryland, USA
|
Posted: Sun Dec 24, 2006 3:27 pm Post subject: |
|
|
Thanks for your help! I loaded the film in okay, I think, based on just looking at the mechanics of the device. I think I wasted one frame, however, since I first forgot to reset the counter before I started winding. I ended up winding "one extra wind" before the counter got to the position it SHOULD have been at before I started winding. Let me ask you this -- I threaded the film around and fastened it to the "takeup spool," such that the big "double arrow" on the film backing was pretty much positioned over the metal roller closest to the film itself. Thus, I tried to minimize how much I spooled onto the takeup spool before I started winding. Was this right? Also, what setting should the winder be at before I start threading the film, just to make sure I have that right. Believe it or not, though we have a 4x5 Crown Graphic, I'm actually using this film back (at the moment) on a Zero Image teak-wood 4x5 PINHOLE camera! I just got the film back via UPS (bought it on Ebay) yesterday. Thanks again, Scott. If curious, our few 4x5 shots thus far are at http://www.scottspeck.com/pictures/4x5/index.html, and pinhole shots (medium format thus far) are at http://www.scottspeck.com/pictures/pinhole/index.html.
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
scottspeck
Joined: 24 Dec 2006 Posts: 3 Location: Maryland, USA
|
Posted: Sun Dec 24, 2006 3:29 pm Post subject: |
|
|
Actually, I meant, "What setting should the COUNTER" be at before I load and start winding...
Scott
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
troublemaker
Joined: 24 Nov 2003 Posts: 715 Location: So Cal
|
Posted: Sun Dec 24, 2006 7:11 pm Post subject: |
|
|
Normally, when a roll is finished, after the 10th frame, (the last frame on any Graflex roll holder), the the counter willthen free wheel so one can finish winding the paper over theexposed film and thus open and unload the holder. Leave the holder as is and re-load your new unexpesed roll, start the take up, and make sure the paper is centerered well, and does not slip. I find it easiest to turn the take up spool itself until the paper overlaps keeping tension by placing my hand on the fresh roll,and this also provides some extra shade if out in field. Then crank the winder until the start arrow on the paper lines up with the arrow located on the top inside the holder. I like to pass it 1/8 to 1/4". Personal prefernece. Close the holder and then click the counter, which engages it, and crank to the first frame. After a while it becomes automatic.
Also, IMHO, it is good practice to keep any and all holders, esspecially old ones,in the dark at all times, or at least shaded, and never left out on the camera in direct sunlight, and always with the dark slide in place unless exposing.
Sorry if that's TMI; not meant to sound like no one knows how to load or handle thier gear.
Have a nice soltice season... |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
45PSS
Joined: 28 Sep 2001 Posts: 4081 Location: Mid Peninsula, Ca.
|
Posted: Mon Dec 25, 2006 2:09 am Post subject: |
|
|
To help clarify what trouble maker said, go to http://www.southbristolviews.com/ and copy the pdf Roll Film Back instructions in the Graflex manuals section.
_________________ The best camera ever made is the one that YOU enjoy using and produces the image quality that satifies YOU. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
troublemaker
Joined: 24 Nov 2003 Posts: 715 Location: So Cal
|
Posted: Mon Dec 25, 2006 6:13 am Post subject: |
|
|
Thanks Charles,
I didn't have time to find and post the link on my way out the door earlier.
So yes, do read the manual, always a good idea. And have a nice new years...
Stephen
[ This Message was edited by: troublemaker on 2006-12-24 22:16 ] |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
BrianShaw
Joined: 24 Dec 2006 Posts: 71 Location: Los Angeles, CA
|
Posted: Sat Jan 27, 2007 11:28 pm Post subject: |
|
|
Refering back to Henry's post... when one needs to put the darkslide back in depends a lot on what shutter one is using.
With a leaf shutter, the film can be wound without replacing the darkslide. Same is true when using the focal plane shutter.
The important thing to remember is that the darkslide must be replaced before winding (setting to one of the lettered openings) the focal plane shutter since that will expose the film to light.
And, needless to say, don't forget to replace the darkslide before removing the RH-10 from the camera if there is film in it! |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Henry
Joined: 09 May 2001 Posts: 1636 Location: Allentown, Pennsylvania
|
Posted: Fri Feb 02, 2007 9:15 pm Post subject: |
|
|
I find that the torsion created by advancing the winding lever can cause just enough wiggle between my roll holders and the camera back, that I want to take that extra precaution of protecting the film by replacing the dark slide *before* winding on. This is especially true when shooting in bright sun, and I also try to remember to shield the roll holder with the dark cloth when winding on.
[ This Message was edited by: Henry on 2007-02-02 13:17 ] |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|